Sand Mill, Bead Mill, Horizontal Sand Mills, Dispersing and Milling, Starch Paste Kettle, Mumbai, India

::: DISPERSING AND MILLING :::

<< SAND MILL | BEAD MILL | HORIZONTAL SAND MILLS >>

SAND MILL

TWIN SAND MILL

4.	SAND MILL

Used mainly by the paint, ink & coating industries for size reduction and dispersing of pigments in liquids. Particle size reduction upto 2 microns is possible in a single pass. The material to be processed is pumped from the bottom of the mill into the milling chamber which is filled with grinding media of 3mm dia. The media is agitated by a shaft fitted with a number of impeller discs along its length. As the material moves upwards it is subjected to high hydraulic & shearing forces between the grinding media which results in fine grinding of the material. This material then passes through the screen which separates the media from the process material. All mills are povided with a jacket arrangement for cooling the material in the grinding chamber.

OPTIONAL AVAILABLE

Grinding Media.
Pressurized Mills.

MODEL

HP

CHAMBER CAP IN LTRS.

FLOW RATE/HR.

SP2

3

8

50

SP3

10

16

75

SP4

15

32

300

SP5

20

64

500

SP6

40

120

800

Flow rate stated above depends on various factors such as material to be processed, feed rate, viscosity etc.

TWIN SAND MILL

MILLING SYSTEM

5.	BEAD MILL

This is a batch process machine for size reduction & dispersing of paints, inks, coatings etc. The machine is very widely used in labs for processing of small daily batches. The mill consists of a grinding vessel inside which rotates a shaft fitted with impeller disc. The grinding media and the charged material are filled into the vessel & the shaft is run at a very high speed for a particular time till dispersion is achieved . Vessel with jacket arrangements are provided as a standard feature.

MODEL	MOTOR HP	SHELL VOLUME IN LTRS.
SFBM - 1	0.5	1
SFBM - 2	1	2
SFBM - 5	2	5
SFBM - 10	3	10
SFBM - 15	3	15
SFBM - 20	5	20
SFBM - 50	7.5	50
SFBM - 100	10	100
SFBM - 150	15	150

Note : Working capacity is 60 to 70% of total capacity.

HORIZONTAL SAND MILL

6.	HORIZONTAL SAND MILLS

These mills are used for processing of inks, paints & coatings etc etc where a high level of size reduction & dispersing is required. Grinding & dispersing takes place in a pressurized chamber.. A shaft fitted with wear resistant impeller discs agitates the grinding media.. Particle size reduction in sub micron size is possible in a single pass. Mills are equipped with a cooling chamber as a standard feature.

MODEL	HP	VESSEL CAP. IN LTRS.
HM 0.75	5	0.86
HM 1.5	5	1.7
HM 5	15	6.5
HM 15	20	16.8
HM 30	30	33
HM 45	40	49.2
HM 60	50	67.8
HM 90	60	101
HM 120	75	142
HM 200	100	253

1. Cartridge mechanical seal and water cooled pressure reservoir with level switch and thermometer.

2. Tangential product inlet optimizes product flow and facilitates clean-up.

3. Abrasion resistant 420 stainless steel grinding chamber with dual zone water jacket.

4. Center media fill and drain ports ease media loading and removal for rapid product cleanup and changeover.

5. Interchangeable disc and spacer configurations permit optimization for diverse product types.

6. Front end product separator screen provides easy access.

7. Self-contained and telescoping carriage system for easy removal of chamber and access to chamber components.

8. Unique, ergonomically designed frame provides easy access to mechanical drive and internal components.